In the
process of switch placement, we can configure according to different types. For
example, the rotary switch needs to be classified according to its structure
when setting. Generally, it includes two types, the first is BBM contact type,
and the second is MBB contact type. When we solve the problem, we can adjust it
according to different switch states.
What are the
types of rotary switches? In fact, when designing the circuit, the purpose and
safety requirements of the circuit involved are different. In the process of
transposition adjustment, we need to replace the collision state of the front
and rear contacts, so that we can connect or disconnect, and truly realize the
purpose of opening or powering off.
I.
Division
according to structure
In this way
of division, it can be divided into waterproof switches and fire rated
switches. No matter which one is, its corresponding material must have certain
high temperature resistance characteristics, so as to meet the market demand.
Especially for the fire or waterproof grade, it is generally required to reach
the third gear or the second gear.
II. internal multi bit structure
In this
respect, it can be divided into two categories, namely unit structure and multi
position structure. In fact, for rotary switch, it belongs to a switch button
controlled by a rotary handle, so its structure mode is not complicated when
operating. In this respect, the level can be classified according to two
levels.
III. Layout adjustment of line setting
For this
type, when designing the circuit, due to the different positions of the contact
points, there are different operating skills for the opening and closing of the
switch. When dealing with these problems, we need to correct them according to
the internal principle of the rotary switch, so that we can adjust and design
according to the relevant type division, then it is reasonable in the line
layout.
Through
the above introduction, you should have a certain understanding of the types of
rotary switches. When we use them, we must ensure safety, so that we can really
ensure the adaptability
